-40 ℃ low-temperature circulating water bath reaction tank

The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.

Category:

Refrigeration system

CONTACT

MESSAGES

Hotline:

181-160-62953

Back

产品描述

产品描述
Product features
Performance
Device video

Introduce

The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.
The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.

model			DFY-5/40	DFY-10/40	DFY-20/40
Main technical parameters	Scope of use		-40～99℃；±0.1℃
	voltage（V）		220V/50Hz，220V/60Hz
	Phase number（P）		1
	Power（kW）		1	2	3
	total power（kW）		1.75	3	4.5
	Refrigeration capacity（w）	0℃	875W	1800W	2300W
		-10℃	650W	1650W	1750W
		-20℃	320W	1800W	950W
		-40℃	225W	350W	550W
	temperature sensor		PT100
	Protect		Overvoltage, delay, overcurrent, overheating, leakage, protector
	Storage tank volume （L）		5	10	20
	Tank size (mm)		180*180	300*200	350*250
	Slot opening size（mm）		180	240	320
	Maximum capacity for placing flasks（mL）		2	5	10
compressor	types of		rotor compressor
	brand		Scop	Taikang	Taikang
	power（kW）		0.75	1.125	2.25
	current（A)		3.4	5	10
	P		1	1½	3
	number		1
	refrigerant		R404A
	power（w）		100
	current（A）		0.5
	rated head（m）		6
	Rated flow rate（L/min）		10
Product size	longWidth Height（mm）		477344683	540424776	590478840
*PLC	control system		Siemens S7-200smartPLC
	Programming		Writable Up to 40 steps per 5 programs
	control model		The material temperature and equipment outlet temperature can be switched independently
	Communication protocol		Modbus RTU protocol RS485 interface (optional RS232 Ethernet)
	operation panel		7-inch Siemens color touch screen (optional 10 inch)
	data export		supportUSB data export, temperature data can be exported in TXT format
packing list	One gas valve, one roll of Thread seal tape, one pole and one set of cross
	Silicone tape insulation hose 2 pieces
	One operating manual
The data section is factory test data, but there may be some slight deviation in reality
*PLC is an optional PLC part of the data, and if there is no PLC, it is not applicable

产品描述
Product features
Performance
Device video

The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.
Features
The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.

Features

model			DFY-5/40	DFY-10/40	DFY-20/40
Main technical parameters	Scope of use		-40～99℃；±0.1℃
	voltage（V）		220V/50Hz，220V/60Hz
	Phase number（P）		1
	Power（kW）		1	2	3
	total power（kW）		1.75	3	4.5
	Refrigeration capacity（w）	0℃	875W	1800W	2300W
		-10℃	650W	1650W	1750W
		-20℃	320W	1800W	950W
		-40℃	225W	350W	550W
	temperature sensor		PT100
	Protect		Overvoltage, delay, overcurrent, overheating, leakage, protector
	Storage tank volume （L）		5	10	20
	Tank size (mm)		180*180	300*200	350*250
	Slot opening size（mm）		180	240	320
	Maximum capacity for placing flasks（mL）		2	5	10
compressor	types of		rotor compressor
	brand		Scop	Taikang	Taikang
	power（kW）		0.75	1.125	2.25
	current（A)		3.4	5	10
	P		1	1½	3
	number		1
	refrigerant		R404A
	power（w）		100
	current（A）		0.5
	rated head（m）		6
	Rated flow rate（L/min）		10
Product size	longWidth Height（mm）		477344683	540424776	590478840
*PLC	control system		Siemens S7-200smartPLC
	Programming		Writable Up to 40 steps per 5 programs
	control model		The material temperature and equipment outlet temperature can be switched independently
	Communication protocol		Modbus RTU protocol RS485 interface (optional RS232 Ethernet)
	operation panel		7-inch Siemens color touch screen (optional 10 inch)
	data export		supportUSB data export, temperature data can be exported in TXT format
packing list	One gas valve, one roll of Thread seal tape, one pole and one set of cross
	Silicone tape insulation hose 2 pieces
	One operating manual
The data section is factory test data, but there may be some slight deviation in reality
*PLC is an optional PLC part of the data, and if there is no PLC, it is not applicable

Features

产品描述
Product features
Performance
Device video

The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.
Performance
The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.

Performance

model			DFY-5/40	DFY-10/40	DFY-20/40
Main technical parameters	Scope of use		-40～99℃；±0.1℃
	voltage（V）		220V/50Hz，220V/60Hz
	Phase number（P）		1
	Power（kW）		1	2	3
	total power（kW）		1.75	3	4.5
	Refrigeration capacity（w）	0℃	875W	1800W	2300W
		-10℃	650W	1650W	1750W
		-20℃	320W	1800W	950W
		-40℃	225W	350W	550W
	temperature sensor		PT100
	Protect		Overvoltage, delay, overcurrent, overheating, leakage, protector
	Storage tank volume （L）		5	10	20
	Tank size (mm)		180*180	300*200	350*250
	Slot opening size（mm）		180	240	320
	Maximum capacity for placing flasks（mL）		2	5	10
compressor	types of		rotor compressor
	brand		Scop	Taikang	Taikang
	power（kW）		0.75	1.125	2.25
	current（A)		3.4	5	10
	P		1	1½	3
	number		1
	refrigerant		R404A
	power（w）		100
	current（A）		0.5
	rated head（m）		6
	Rated flow rate（L/min）		10
Product size	longWidth Height（mm）		477344683	540424776	590478840
*PLC	control system		Siemens S7-200smartPLC
	Programming		Writable Up to 40 steps per 5 programs
	control model		The material temperature and equipment outlet temperature can be switched independently
	Communication protocol		Modbus RTU protocol RS485 interface (optional RS232 Ethernet)
	operation panel		7-inch Siemens color touch screen (optional 10 inch)
	data export		supportUSB data export, temperature data can be exported in TXT format
packing list	One gas valve, one roll of Thread seal tape, one pole and one set of cross
	Silicone tape insulation hose 2 pieces
	One operating manual
The data section is factory test data, but there may be some slight deviation in reality
*PLC is an optional PLC part of the data, and if there is no PLC, it is not applicable

Performance

产品描述
Product features
Performance
Device video

The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.
Video
The constant temperature circulating water bath is suitable for low-temperature experiments in departments such as scientific research, biology, physics, medicine, and chemical engineering. It can replace dry ice and liquid nitrogen for low-temperature reactions, providing low-temperature conditions for related equipment. It can also be used as a low-temperature water tank for viscosity testing. It can also be equipped with magnetic stirring at the bottom, which is divided into two stages of stirring, making the temperature inside the stainless steel tank more uniform and intelligent temperature control accurate.

Video

model			DFY-5/40	DFY-10/40	DFY-20/40
Main technical parameters	Scope of use		-40～99℃；±0.1℃
	voltage（V）		220V/50Hz，220V/60Hz
	Phase number（P）		1
	Power（kW）		1	2	3
	total power（kW）		1.75	3	4.5
	Refrigeration capacity（w）	0℃	875W	1800W	2300W
		-10℃	650W	1650W	1750W
		-20℃	320W	1800W	950W
		-40℃	225W	350W	550W
	temperature sensor		PT100
	Protect		Overvoltage, delay, overcurrent, overheating, leakage, protector
	Storage tank volume （L）		5	10	20
	Tank size (mm)		180*180	300*200	350*250
	Slot opening size（mm）		180	240	320
	Maximum capacity for placing flasks（mL）		2	5	10
compressor	types of		rotor compressor
	brand		Scop	Taikang	Taikang
	power（kW）		0.75	1.125	2.25
	current（A)		3.4	5	10
	P		1	1½	3
	number		1
	refrigerant		R404A
	power（w）		100
	current（A）		0.5
	rated head（m）		6
	Rated flow rate（L/min）		10
Product size	longWidth Height（mm）		477344683	540424776	590478840
*PLC	control system		Siemens S7-200smartPLC
	Programming		Writable Up to 40 steps per 5 programs
	control model		The material temperature and equipment outlet temperature can be switched independently
	Communication protocol		Modbus RTU protocol RS485 interface (optional RS232 Ethernet)
	operation panel		7-inch Siemens color touch screen (optional 10 inch)
	data export		supportUSB data export, temperature data can be exported in TXT format
packing list	One gas valve, one roll of Thread seal tape, one pole and one set of cross
	Silicone tape insulation hose 2 pieces
	One operating manual
The data section is factory test data, but there may be some slight deviation in reality
*PLC is an optional PLC part of the data, and if there is no PLC, it is not applicable

Video

refrigeration system